A close-up of the turbo.
Viewed: 2164 times.
|
A custom support bracket that will support the turbo by bracing it against the gearbox.
Viewed: 2115 times.
|
With the standard exhaust back on, it was time to mount the VEMS WBO2+EGT system. Picture shows the hole for the wideband lambda sensor.
Viewed: 2262 times.
|
And also the hole for the exhaust gas temperature (EGT) sensor.
Viewed: 2079 times.
|
Welding the bosses on.
Viewed: 2090 times.
|
|
Done.
Viewed: 2121 times.
|
The rear engine bay looks a bit empty without the turbocharger now.
Viewed: 2502 times.
|
Wideband lambda sensor screwed into the downpipe.
Viewed: 1988 times.
|
EGT sensor screwed into the downpipe as well :-).
Viewed: 2196 times.
|
Routing the wiring towards the front of the car...
Viewed: 2020 times.
|
...and inside the cabin.
Viewed: 2052 times.
|
With power applied, the gauge lit up and started reading out fuel residuals and ambiental temperature present in the downpipe :-).
Viewed: 2032 times.
|
Engine started up - and it works! Giving out proper values now. Cool!
Viewed: 2188 times.
|
The gauge is communicating with my laptop without probs. Downloading (or uploading, depends on how you look at it) the latest firmware into the gauge.
Viewed: 2188 times.
|
MegaTune 2.25 with VEMS WBO2+EGT config - realtime output from the gauge. We can now drive around and log AFR and EGT values of the engine, running on standard Bosch Motronic 1.3 ECU.
Viewed: 3017 times.
|
4
