Another phase of work... Now it's time to sort out the fueling system for both engines.
Viewed: 2953 times.
|
This is a custom (like most of things) aluminium fuel tank, made to our specs.
Viewed: 2704 times.
|
We actually got it a couple of months ago, but didn't have the use for it until now.
Viewed: 2722 times.
|
Tank inlet, fuel level sender, one of the breathers and fuel returns for both engines.
Viewed: 2735 times.
|
A shot from another angle.
Viewed: 2642 times.
|
Outlet for the pumps.
Viewed: 2679 times.
|
Little swirls are there for a more constant fuel supply. The tank is baffled too.
Viewed: 2813 times.
|
However, bending and welding has caused the aluminium to crack along the egdes...
Viewed: 2882 times.
|
...and it was quite visibly leaking, on my water leak-down test :-(.
Viewed: 2790 times.
|
To make it worse, one of the welds on the outlets had a little hole too.
Viewed: 2743 times.
|
Nice moment :-).
Viewed: 3164 times.
|
The tank had all the edges welded up, but it still had a leak-hole on the outlet...
Viewed: 2851 times.
|
...so we used "liquid metal" to seal it up once and for all.
Viewed: 2757 times.
|
Leak-free tank provisionally fitted into the car.
Viewed: 3094 times.
|
A shot from the rear.
Viewed: 3515 times.
|
405's fuel pump for the front engine fitted behind the handbrake (until we find a better place for it) and fuel return hoses fitted on as well.
Viewed: 3111 times.
|
1
