Phase 6: Fueling System, Instrumentation & Misc 
You don't normally get a chance to look at the engine from this angle ;-).
You don't normally get a chance to look at the engine from this angle ;-).
Viewed: 1648 times.

Motor oil changed with fresh 10W40 oil and Purflux oil filter. Gearbox received a couple of liters of 75W90 as well.
Motor oil changed with fresh 10W40 oil and Purflux oil filter. Gearbox received a couple of liters of 75W90 as well.
Viewed: 1422 times.

Rear-left caliper seemed to stick, so we got that inspected too.
Rear-left caliper seemed to stick, so we got that inspected too.
Viewed: 1543 times.

A week later, when we got some time, we decided to start up both engines together for the first time!
A week later, when we got some time, we decided to start up both engines together for the first time!
Viewed: 1895 times.

The battery was weak so it needed assistance, but the engines started up without problems - ofcourse! :-)

video available here:
http://www.youtube.com/watch?v=hY4o2UU9HSY
The battery was weak so it needed assistance, but the engines started up without problems - ofcourse! :-)

video available here:
http://www.youtube.com/watch?v=hY4o2UU9HSY
Viewed: 2034 times.

This was a normal view from our window for many, many days, weeks, months...
This was a normal view from our window for many, many days, weeks, months...
Viewed: 1495 times.

Exhaust manifold had a leak around that pipe, so it had to be fixed.
Exhaust manifold had a leak around that pipe, so it had to be fixed.
Viewed: 1310 times.

Also, an expansion tank was added...
Also, an expansion tank was added...
Viewed: 1228 times.

...as the rear engine cooling wasn't doing it's job properly without it.
...as the rear engine cooling wasn't doing it's job properly without it.
Viewed: 1287 times.

A view at a fully functional rear Mi16 engine :-).
A view at a fully functional rear Mi16 engine :-).
Viewed: 1564 times.

Next it was time to construct some side air-intake vents.
Next it was time to construct some side air-intake vents.
Viewed: 1250 times.

An old rear interior side panel trim was used to make a mould.
An old rear interior side panel trim was used to make a mould.
Viewed: 1144 times.

All the materials required.
All the materials required.
Viewed: 1120 times.

My father laying out sheets of fibreglass into the mould.
My father laying out sheets of fibreglass into the mould.
Viewed: 1390 times.

Side vent moulded... but we were not too happy with it in the end...
Side vent moulded... but we were not too happy with it in the end...
Viewed: 1228 times.

...therefore we made some metal ones instead.
...therefore we made some metal ones instead.
Viewed: 1432 times.

Powered by Gallery v1