Another phase of work... Now it's time to sort out the fueling system for both engines.
Viewed: 3094 times.
|
This is a custom (like most of things) aluminium fuel tank, made to our specs.
Viewed: 2839 times.
|
We actually got it a couple of months ago, but didn't have the use for it until now.
Viewed: 2853 times.
|
Tank inlet, fuel level sender, one of the breathers and fuel returns for both engines.
Viewed: 2866 times.
|
A shot from another angle.
Viewed: 2780 times.
|
Outlet for the pumps.
Viewed: 2822 times.
|
Little swirls are there for a more constant fuel supply. The tank is baffled too.
Viewed: 2942 times.
|
However, bending and welding has caused the aluminium to crack along the egdes...
Viewed: 3012 times.
|
...and it was quite visibly leaking, on my water leak-down test :-(.
Viewed: 2925 times.
|
To make it worse, one of the welds on the outlets had a little hole too.
Viewed: 2873 times.
|
Nice moment :-).
Viewed: 3301 times.
|
The tank had all the edges welded up, but it still had a leak-hole on the outlet...
Viewed: 2987 times.
|
...so we used "liquid metal" to seal it up once and for all.
Viewed: 2894 times.
|
Leak-free tank provisionally fitted into the car.
Viewed: 3230 times.
|
A shot from the rear.
Viewed: 3645 times.
|
405's fuel pump for the front engine fitted behind the handbrake (until we find a better place for it) and fuel return hoses fitted on as well.
Viewed: 3246 times.
|
1
