Made up a simple mountingpoint for pressure relief valve inside the car.
Viewed: 1406 times.
|
|
Had to make holes in the new front wings to fit the Audi A4 clear repeaters.
Viewed: 1417 times.
|
Filled wiper and washer-holes in the rear hatch, and started spraying the new parts with white primer.
Viewed: 1513 times.
|
Completely dent-free bonnet, I oly had to fix one dent myself, so was pretty spot on from the breakers.
Viewed: 1380 times.
|
Closeup of rear hatch.
Viewed: 1329 times.
|
Doors...
Viewed: 1278 times.
|
I also sprayed the complete car exterior with the white primer now.
Viewed: 1354 times.
|
I just hope I've been good enough when sanding the filler, so no dents will show after paint is applied.
Viewed: 1333 times.
|
|
|
Closeup of rear hatch, think the remains after the holes are invisible now :)
Viewed: 1377 times.
|
CIMG1280.jpg
Viewed: 1351 times.
|
I suddenly realized my work on the hood that I got from the breakers was to no use.
The Throttlebodies sat 5-6cm too high.
I bought a glassfibre one from Magnum motorsports. With this I got 1cm clearance between the air-filter and bonnet, just enough :)
Viewed: 1532 times.
|
Masked her up to paint areas that won't be easily accessed when doors, hatch etc. are mounted.
Viewed: 1500 times.
|
Pretty bright that orange.
Viewed: 1310 times.
|
|
|
|
|
|
6
