|
|
|
|
|
Pistons and rods are assembled, rings are ground to correct ring-gap
Viewed: 1781 times.
|
Freshly ground flywheel, and Valeo racing clutch
Viewed: 1768 times.
|
Flywheel/cluch once again
Viewed: 1892 times.
|
Head with camshafts mounted, they lift quite a bit :)
Viewed: 2604 times.
|
Certainly :)
Viewed: 1959 times.
|
Testfitted the end-caps I got from Martin
Viewed: 1968 times.
|
Head with cams
Viewed: 1906 times.
|
Testfitting exhaustmanifold and put on the shiny rockercover
Viewed: 1938 times.
|
309 gti16 manifold, I just hope it's not going to be a restriction
Viewed: 2668 times.
|
Nice piece of tubing
Viewed: 2054 times.
|
Once again
Viewed: 2019 times.
|
Testfitting of complete inlet with injectors, these are 440cc/min Bosch ones
Viewed: 1900 times.
|
Hopefully it will not only look good
Viewed: 1896 times.
|
Better get some air into the cylinders too :)
Viewed: 1966 times.
|
Put engineblock in the stand and put the main-bearings in place
Viewed: 1878 times.
|