|
|
|
|
|
|
|
Pistons and rods are assembled, rings are ground to correct ring-gap
Viewed: 2033 times.
|
Freshly ground flywheel, and Valeo racing clutch
Viewed: 2023 times.
|
Flywheel/cluch once again
Viewed: 2156 times.
|
Head with camshafts mounted, they lift quite a bit :)
Viewed: 2895 times.
|
Certainly :)
Viewed: 2251 times.
|
Testfitted the end-caps I got from Martin
Viewed: 2238 times.
|
Head with cams
Viewed: 2171 times.
|
Testfitting exhaustmanifold and put on the shiny rockercover
Viewed: 2208 times.
|
309 gti16 manifold, I just hope it's not going to be a restriction
Viewed: 2943 times.
|
Nice piece of tubing
Viewed: 2320 times.
|
Once again
Viewed: 2286 times.
|
Testfitting of complete inlet with injectors, these are 440cc/min Bosch ones
Viewed: 2171 times.
|
Hopefully it will not only look good
Viewed: 2160 times.
|
Better get some air into the cylinders too :)
Viewed: 2222 times.
|
Put engineblock in the stand and put the main-bearings in place
Viewed: 2136 times.
|
3
