Working late into the night!
Viewed: 2392 times.
|
Sensor loom all labeled up and ready to be used later.
Viewed: 2328 times.
|
It was then time rearrange the radiator connections a bit in order to start plumbing the rear engine coolant system in.
Viewed: 2316 times.
|
This required for several custom hoses to be created.
Viewed: 2313 times.
|
Et voila - both "cold" coolant pipes in place.
Viewed: 2322 times.
|
Front engine's original fuel filter replaced by a new smaller one...
Viewed: 2311 times.
|
...and relocated to the inner wing...
Viewed: 2373 times.
|
...to make space for rear engine coolant hoses (and it's wise to do it for safety reasons anyway).
Viewed: 2408 times.
|
Expansion tank back in it's position.
Viewed: 2554 times.
|
With the front engine's coolant system sorted, it was time to continue work on the rear engine's cooling.
Viewed: 2230 times.
|
After having measured everything three times :-), "welding" of the copper pipes began.
Viewed: 2177 times.
|
Threaded part will be screwed into a flow valve.
Viewed: 2200 times.
|
We also had to make a lot of 90-degree bends.
Viewed: 2244 times.
|
Working late into the night, as usual!
Viewed: 2290 times.
|
A puzzle of pipes nearing completion.
Viewed: 2263 times.
|
With all the pipes made, the next logical step was to install them :-).
Viewed: 2356 times.
|
2
