OE stopping power
Viewed: 1471 times.
|
306S16 front calipers sourced from a friend... poor looking indeed
Viewed: 1365 times.
|
after sandblasting situation improves a lot
Viewed: 1412 times.
|
i chose black matte finish for calipers all around. caliper paint in chosen tone impossible to buy, instead i used exhaust paint which acts as primer and protectant too
Viewed: 1398 times.
|
all parts get three coats of 500˙C enduring paint and two hour oven treatment at 200˙C. this should grant durability
Viewed: 1454 times.
|
calipers finished, ready for assembly, waiting for new seals and studs
Viewed: 1354 times.
|
grooved 266mm ATE powerdisc chosen for good value for money
Viewed: 1443 times.
|
rear caliper needs treatment
Viewed: 1373 times.
|
bleeder stuck!
Viewed: 1388 times.
|
|
this is redy for install, waiting for workshop to sort bleeder valves
Viewed: 1397 times.
|
calipers and pads front and rear ready for assembly. front calipers total overhaul: brand new nuts, bolts, sliders, seals, rubber... everything
Viewed: 1408 times.
|
brake fluid enduring red grease applied to cylinder-piston seal
Viewed: 1411 times.
|
rebuilt 306S16 stopping power installed.. hard to imagine these are the same calipers as above
Viewed: 1433 times.
|
rear side view
Viewed: 1368 times.
|
front view means business :)
Viewed: 1363 times.
|
1
