After a rather hard fight with this one (309gti beam) I ended up smashing it so hard that the arms came off the shafts :)
Viewed: 1896 times.
|
I managed to save the TB's and ARB, that was the most important thing after all.
Viewed: 1755 times.
|
Went to the breakers and got a base model 309 beam and dismantled it.
One shaft was perfect, and the other one you can see in this picture.
Viewed: 1892 times.
|
Continued with sandblasting the good beam tube.
Viewed: 1757 times.
|
Pretty much free of rust by now.
Viewed: 1594 times.
|
But got a little brown color after I used a waterhose gettign rod of the sand.
Viewed: 1634 times.
|
Gave it a little light blasting again.
Viewed: 1610 times.
|
This time using just air to get rid of the sand, now it looks good enough :)
Viewed: 1539 times.
|
Before priming
Viewed: 1587 times.
|
Added zink-primer
Viewed: 1570 times.
|
Hope it will last for a while.
Viewed: 1605 times.
|
First I painted the whole beamtube black, then added yellow.
Viewed: 1608 times.
|
Looking good
Viewed: 1604 times.
|
Finished beam tube
Viewed: 1768 times.
|
Also got the other parts of the beam sandblasted and primed.
Viewed: 1643 times.
|
Trailingarm with new shaft pressed in position
Viewed: 1811 times.
|
New bearings added to the tube, and also got the seals in place.
Viewed: 1663 times.
|
Painted the torsionbars red
Viewed: 1727 times.
|
|
And painted the rest of the beam parts black
Viewed: 1629 times.
|