Bought an Aeroturbine stainless 2.5" muffler and resonator from eBay. These are supposed to flow better than a straight tube.
Viewed: 2067 times.
|
I guess you can see why here :)
Viewed: 1846 times.
|
And here.
Viewed: 1684 times.
|
Testfitting exhaust tip and muffler, think it'll look nice.
Viewed: 1682 times.
|
Borrowed a TiG welder at the university and welded it myself.
Viewed: 1994 times.
|
Never used a Tig before, mostly ugly welds.
Viewed: 1820 times.
|
But this was pretty ok, I started to learn when I was almost finished :)
Viewed: 1991 times.
|
Mounted on car, good clearances.
Viewed: 1963 times.
|
Tight and nice where it's supposed to sit.
Viewed: 1810 times.
|
Due to the Aeromuffler turned out just tooooo noisy, it was pretty insane... I had to make a new one. So made a Simons 2.5" system (black mufflers) which was very quiet.
Viewed: 1927 times.
|
In fact the same soundlevel as the standard Bosal you can also see in the picture.
3 exhaust systems that'll bolt straight on the V-band joint under car :)
Viewed: 2496 times.
|
