|
|
|
|
|
|
|
Pistons and rods are assembled, rings are ground to correct ring-gap
Viewed: 2129 times.
|
Freshly ground flywheel, and Valeo racing clutch
Viewed: 2127 times.
|
Flywheel/cluch once again
Viewed: 2256 times.
|
Head with camshafts mounted, they lift quite a bit :)
Viewed: 3003 times.
|
Certainly :)
Viewed: 2353 times.
|
Testfitted the end-caps I got from Martin
Viewed: 2330 times.
|
Head with cams
Viewed: 2289 times.
|
Testfitting exhaustmanifold and put on the shiny rockercover
Viewed: 2304 times.
|
309 gti16 manifold, I just hope it's not going to be a restriction
Viewed: 3035 times.
|
Nice piece of tubing
Viewed: 2418 times.
|
Once again
Viewed: 2383 times.
|
Testfitting of complete inlet with injectors, these are 440cc/min Bosch ones
Viewed: 2263 times.
|
Hopefully it will not only look good
Viewed: 2259 times.
|
Better get some air into the cylinders too :)
Viewed: 2325 times.
|
Put engineblock in the stand and put the main-bearings in place
Viewed: 2243 times.
|
3
