And then rack is mounted on the subframe :)
Viewed: 1462 times.
|
Started fitting some wiring
Viewed: 1393 times.
|
Which was kinda complicated in the beginning. After a while I sorted it out and also removed lotsa unnecessary wiring.
Viewed: 1384 times.
|
Started to fit a bare block to see how things turns out regarding clearance
Viewed: 1489 times.
|
Airfilter and trumpets seem to sit very very high in the bay
Viewed: 1432 times.
|
No chance to get the standard bonnet over this
Viewed: 1905 times.
|
Put the radiator in place too, fits fine.
Viewed: 1545 times.
|
At least the bay looks nice now
Viewed: 1528 times.
|
It's too tight on the standard collectorflange of the 309 gti16 exhaust manifold too, I fixed this by chopping it off and reangling it welding a 2.5" V-band flange in place.
Viewed: 1470 times.
|
4 shiny nice throttleplates
Viewed: 1536 times.
|
Fitted the coil in place with the 2.0 8v thermostathousing
Viewed: 1438 times.
|
Fits like hand in a glove
Viewed: 1608 times.
|
Oil-cooler in place, position was like that because it was the only way I could seem to fit it with the hoses that came with the mounting-kit.
Viewed: 1461 times.
|
Side-shot
Viewed: 1473 times.
|
Alternator clearance
Viewed: 1482 times.
|
Time for first start! Fitted the real engine this time!
Viewed: 1446 times.
|
Gotten more crowded in bay after cooling hoses etc. is mounted.
Viewed: 1454 times.
|
Laptop hooked up with the Emerald M3D
Viewed: 1466 times.
|
Top shot of engine, still nice and shiny.
Viewed: 1457 times.
|
If it just could stay like this forever
Viewed: 1502 times.
|