And then rack is mounted on the subframe :)
Viewed: 1565 times.
|
Started fitting some wiring
Viewed: 1493 times.
|
Which was kinda complicated in the beginning. After a while I sorted it out and also removed lotsa unnecessary wiring.
Viewed: 1491 times.
|
Started to fit a bare block to see how things turns out regarding clearance
Viewed: 1599 times.
|
Airfilter and trumpets seem to sit very very high in the bay
Viewed: 1532 times.
|
No chance to get the standard bonnet over this
Viewed: 2007 times.
|
Put the radiator in place too, fits fine.
Viewed: 1648 times.
|
At least the bay looks nice now
Viewed: 1627 times.
|
It's too tight on the standard collectorflange of the 309 gti16 exhaust manifold too, I fixed this by chopping it off and reangling it welding a 2.5" V-band flange in place.
Viewed: 1597 times.
|
4 shiny nice throttleplates
Viewed: 1643 times.
|
Fitted the coil in place with the 2.0 8v thermostathousing
Viewed: 1543 times.
|
Fits like hand in a glove
Viewed: 1716 times.
|
Oil-cooler in place, position was like that because it was the only way I could seem to fit it with the hoses that came with the mounting-kit.
Viewed: 1563 times.
|
Side-shot
Viewed: 1580 times.
|
Alternator clearance
Viewed: 1590 times.
|
Time for first start! Fitted the real engine this time!
Viewed: 1552 times.
|
Gotten more crowded in bay after cooling hoses etc. is mounted.
Viewed: 1555 times.
|
Laptop hooked up with the Emerald M3D
Viewed: 1575 times.
|
Top shot of engine, still nice and shiny.
Viewed: 1562 times.
|
If it just could stay like this forever
Viewed: 1605 times.
|
2
