A secret peep-hole ;-).
Viewed: 4201 times.
|
Self-explanatory really :-D.
Viewed: 4457 times.
|
The next step was to offer up the rear engine bay into the shell...
Viewed: 4054 times.
|
..which gave us an idea of what else needs to be cut out.
Viewed: 3996 times.
|
Most of the inner arch and rear chasis legs removed.
Viewed: 4070 times.
|
Another image showing the profile of rear chasis legs.
Viewed: 3885 times.
|
The engine bay, now strengthened both by subframe and a Sparco strut brace, could be further cut up.
Viewed: 4160 times.
|
It fitted snugly into the rear of the car.
Viewed: 4667 times.
|
Just shows that the proverb "measure three times, cut once" is a wise one :-).
Viewed: 4632 times.
|
The new rear floor and suspension turret tops are level with the front ones, if case you were wondering.
Viewed: 5356 times.
|
An imaginare wheel centered in the rear arches... everything aligned nicely.
Viewed: 4492 times.
|
The arches themselves are modyfied mk1 Golf ones, done a long time ago to comply with the race regulations (to cover the wheels).
Viewed: 4224 times.
|
With everything aligned and checked...
Viewed: 4369 times.
|
...it was time to call it a day.
Viewed: 4185 times.
|
Next day a little birdie was watching over us... I just hope it doesn't *sing* about our project :-D.
Viewed: 3883 times.
|
The first thing to do was to install the C-pillar part of the roll cage, to keep the rear end from deforming.
Viewed: 4376 times.
|
4
