The car arrived at the laboratory aka butchers :-D with a drawing in the boot.
Viewed: 4473 times.
|
However, the main focus was on the rear engine bay.
Viewed: 4168 times.
|
Since it was a non-GTI shell, the main concern was that additional mounts will be needed for the subframe.
Viewed: 4293 times.
|
However, 205 GTI's subframe fitted straight on, which was nice :-).
Viewed: 4832 times.
|
Now we were able to start cutting off some obviously excessive parts of the bay.
Viewed: 4022 times.
|
Cutting the non-required part of the floorpan off.
Viewed: 4039 times.
|
And then the additional parts of the inner arches.
Viewed: 3920 times.
|
Door mounting points weren't required either.
Viewed: 3963 times.
|
And neither was most of the bulkhead.
Viewed: 3839 times.
|
Nice action pic :-).
Viewed: 3861 times.
|
Just keep cutting!
Viewed: 3774 times.
|
Now this is far nicer too look at...
Viewed: 4015 times.
|
...and it's a lot lighter too!
Viewed: 3818 times.
|
Reverse angle.
Viewed: 3838 times.
|
Will we be able to "park" it into the rear of the puggy?
Viewed: 3879 times.
|
The mean-looking bay was wondering the same :-).
Viewed: 3941 times.
|
2
