GSXR Throttle Body Installation 
gsxr throttle bodies, with two sets of butterflies, weird
gsxr throttle bodies, with two sets of butterflies, weird
Viewed: 1471 times.

twin bodies not individual
twin bodies not individual
Viewed: 1194 times.

should flow more than double the air than original tb
should flow more than double the air than original tb
Viewed: 1072 times.

alloy butterflies in front of the normal ones, operated by electric
alloy butterflies in front of the normal ones, operated by electric
Viewed: 1042 times.

seperated and stripped
seperated and stripped
Viewed: 1087 times.

gsxr throttle bodies
gsxr throttle bodies
Viewed: 2166 times.

HPIM0361.JPG
HPIM0361.JPG
Viewed: 1031 times.

see only one set of butterflies
see only one set of butterflies
Viewed: 1077 times.

bodies spaced out enough to fit manifold
bodies spaced out enough to fit manifold
Viewed: 1091 times.

std gti6 manifold cut down to accept TB'S
std gti6 manifold cut down to accept TB'S
Viewed: 1241 times.

only one set of butterflies , had to block off holes from the other spindle
only one set of butterflies , had to block off holes from the other spindle
Viewed: 1105 times.

injector holes tapped and filled with cut off bolt, sealed with ptfe and loads of threadlock
injector holes tapped and filled with cut off bolt, sealed with ptfe and loads of threadlock
Viewed: 1116 times.

just got to grind down end to reduce the inlet dia to match the tbs
just got to grind down end to reduce the inlet dia to match the tbs
Viewed: 1155 times.

may have to angle rubber hose slightly to get it to fit ,but i am hoping this won't afect the performance
may have to angle rubber hose slightly to get it to fit ,but i am hoping this won't afect the performance
Viewed: 1284 times.

8v throttle cable spindle attached to bike bodies one, for a smoother throttle responce
8v throttle cable spindle attached to bike bodies one, for a smoother throttle responce
Viewed: 1688 times.

might have to chop some bits off the bodies, maybe even cut a hole in the bonnet
might have to chop some bits off the bodies, maybe even cut a hole in the bonnet
Viewed: 1687 times.

Powered by Gallery v1