it is plan to replace stock rear beam with 309GTI16 assembly
Viewed: 1426 times.
|
this is determining detail of 309GTI16 beam - cast bracket. note more robust design and 3 stud holes instead of 2
Viewed: 1406 times.
|
i set high hopes on this GTI16 beam, but it is dead...
Viewed: 1399 times.
|
...more dead stuff... beam tube beyond reparation. sourced another two! rear beams, after three months struggle managed to put together one beam in 309GTI16 spec
Viewed: 1376 times.
|
309GTI16 trailing arms with negative camber
Viewed: 1627 times.
|
pressed beam mounts and silent block remains
Viewed: 1445 times.
|
at sandblasters...
Viewed: 1294 times.
|
bearing bracket protected from sanding
Viewed: 1322 times.
|
sandblasted trailing arm
Viewed: 1420 times.
|
more sandblasted underpinnings
Viewed: 1342 times.
|
|
powdercoating done, all rear beam parts collected
Viewed: 1361 times.
|
trailing arm in detail
Viewed: 1409 times.
|
the most expensive 309 rear beam in the world, finally assembled! :-)
Viewed: 1429 times.
|
bearings, seals, bolts, bushes, everything new. copper greased, here pictured without ARB
...and as later turned out, assembled wrong way at the workshop, left arm right and vice versa..
Viewed: 1402 times.
|
finally, rear beam assembled right way, ride height set at 310mm
Viewed: 1472 times.
|
1
